Scaffold Pole Banner

Pre-sized banners perfect for use with scaffolding, with 60mm diameter top and bottom pole pockets

Double sided 

Ready-to-order banners, perfect for use on scaffolding, with suitably-sized pole pockets at top and bottom.

Providing scaffolding, construction, renovation and building maintenance companies with the perfect way to advertise their brand during building works.

Pole Pocket Sizing

Pockets are sized at 60mm diameter to easily accommodate a standard scaffold pole.

As with our bespoke banners, pole pockets are inclusive of overall size (not in addition to overall size). So a 1m × 1m banner is 1m tall from the top of the top pocket, to the bottom of the bottom pocket. This means the usable and recommended face/safe area on the banners around 400mm less than the overall height of the banner.

Finishing

PVC-based banners are high-frequency welded at top and bottom to create the pole pockets, and trimmed on the sides.

Fabric banners have stitched pole pockets on the top and bottom, and hems on the sides.

Sometimes eyelets in the welds/joins are required on one side of the banner. If this is the case for your banner, please let us know when ordering and we will add these free of charge.

Bespoke Sizes and Scaffold Wraps

While the sizes listed above have been 'pre-made' for convenience, we can produce Scaffold Banners at any bespoke size.